Hi all,
Can anyone help me?
The cooling fan from my Rambo board doesn't work anymore.
I think it had a short circuit.
What can i do?
Rambo Cooling Fan
-
Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7159
- Joined: Sun Apr 01, 2012 5:26 pm
Re: Rambo Cooling Fan
The first thing I would do is to check the small fuses on the Rambo to see if one of them opened.
If it is not a blown fuse then we would need to know what fan it is and where it is connected on the Rambo.
If it is not a blown fuse then we would need to know what fan it is and where it is connected on the Rambo.
-
dtgriscom
- Printmaster!
- Posts: 205
- Joined: Sun Feb 09, 2014 10:15 pm
- Location: Wakefield, MA
- Contact:
Re: Rambo Cooling Fan
If the fan's getting voltage, but isn't turning, and it isn't caused by some remediable interference, then buying a new fan is pretty cheap. This is the one I picked up from Amazon; it's a LOT quieter than the one that came with the kit:
http://www.amazon.com/gp/product/B0016CMCBG
Usually around $6; it's currently $7.34 with free Prime shipping.
http://www.amazon.com/gp/product/B0016CMCBG
Usually around $6; it's currently $7.34 with free Prime shipping.
-
HighDanger
- Plasticator
- Posts: 7
- Joined: Mon Oct 06, 2014 9:12 am
Re: Rambo Cooling Fan
Sorry for the late reply, but it was the fuse 
Now it is up and running. And i love my Rostock
Now it is up and running. And i love my Rostock