Don't buy That Machine Until 11/27

beilmandesign · Post by **beilmandesign** » Sat Nov 22, 2014 3:15 pm

I just purchased a Rostock MAX™ v2 Desktop 3D Printer Kit. You can be smarter than I and more fortunate by waiting until 11/27:

http://us7.campaign-archive2.com/?u=58c ... 324838c7cf

Wish I knew. I would have waited and bought more upgrades with the $149.85 I would have saved.I don't even have the machine yet and already a bad experience. Turned the whole excitement, positive aura of buying this into something much different.

Don't end up like me - wait! But please take advantage of SeeMeCNC's generosity..buy lots of stuff while its discounted.

BONE · Post by **BONE** » Sat Nov 22, 2014 7:07 pm

Email Support, I'm sure they can work something out with you. Just tell let them know that you want to return the one you just ordered. If they help you out on that, actually return it and order another on 11/27.

Captain Starfish · Post by **Captain Starfish** » Sat Nov 22, 2014 7:23 pm

1. Thank you for sharing the news.

2. Really, a "bad experience" because you bought a great printer at its already silly cheap price instead of being lucky enough to jag it on the special day? I might take the fridge I bought six months ago back to the shop in case it comes up on special somewhere in the next couple of months.

3. Think of it this way: the printer was already at an acceptable price or you wouldn't have bought it. So you got a good deal anyway. The fact you later found out you could have saved a few bucks is irrelevant unless you make it an issue in your own mind. Suggestion: don't. Get stuck into your new machine and start printing great things, focus on the good stuff and you'll soon forget what it cost you anyway.

BenTheRighteous · Post by **BenTheRighteous** » Sat Nov 22, 2014 9:49 pm

First of all let me say I sympathize with you, but you really should've seen that one coming. Would you have bought a big screen TV, or a new laptop, two weeks before Black Friday?

Don't feel bad. We all paid full price for our machines. We still love them. You will too.

Earthbound · Post by **Earthbound** » Sun Nov 23, 2014 1:49 am

Certainly worth $150 to have a long holiday weekend for building.

Chrissi · Post by **Chrissi** » Sun Nov 23, 2014 10:26 am

I bought a MAX just before the new model came out, was I sour grapes? Heck no, I bought the best printer available on the market at the time I made my selection and I was happy with it. Happy to see the company I purchased from innovating, making progress and staying on the top of it's game. Still proud to say "yes I have one of those delta printers from SeeMeCNC" and tell folks about it.

beilmandesign · Post by **beilmandesign** » Sun Nov 23, 2014 10:45 am

All of you responders are right. It's just that it took a while to scrape up the money for this. And I very much want to hold off on upgrades until I buy a OneUp 3D printer for my disabled younger brother. He is very excited about the technology and needs something to immerse himself in. The discount would have gone a long way to allowing me to make this happen for him.

http://www.amazon.com/Printer-Dimension ... 86-7788027

BTW - all of you sharing here is GREATLY APPRECIATED.

Post by **Eaglezsoar** » Sun Nov 23, 2014 12:50 pm

beilmandesign wrote:All of you responders are right. It's just that it took a while to scrape up the money for this. And I very much want to hold off on upgrades until I buy a OneUp 3D printer for my disabled younger brother. He is very excited about the technology and needs something to immerse himself in. The discount would have gone a long way to allowing me to make this happen for him.

http://www.amazon.com/Printer-Dimension ... 86-7788027

BTW - all of you sharing here is GREATLY APPRECIATED.

Please send our blessings to your brother and thank you for the kind gesture for your brother in need.

Jimustanguitar · Post by **Jimustanguitar** » Mon Nov 24, 2014 8:07 am

Email Support, I'm sure they can work something out with you. Just tell let them know that you want to return the one you just ordered. If they help you out on that, actually return it and order another on 11/27.

That's a little sneaky. Call them and ask them if they'll honor their upcoming sale price. Returning something and buying it again to save a few dollars (seller pays shipping 3 times?) is the fair weather consumerism that puts small companies out of business.

beilmandesign · Post by **beilmandesign** » Mon Nov 24, 2014 8:39 am

I agree and would never do that. I sent them an email explaining the situation.

Post by **Eaglezsoar** » Mon Nov 24, 2014 9:17 am

Jimustanguitar wrote:
Email Support, I'm sure they can work something out with you. Just tell let them know that you want to return the one you just ordered. If they help you out on that, actually return it and order another on 11/27.
That's a little sneaky. Call them and ask them if they'll honor their upcoming sale price. Returning something and buying it again to save a few dollars (seller pays shipping 3 times?) is the fair weather consumerism that puts small companies out of business.

I agree 100%. SeeMeCNC is a small Company besides, as Jim has noted whatever cost savings you would obtain would be close to zero when you consider the cost of postage.

beilmandesign · Post by **beilmandesign** » Mon Nov 24, 2014 6:44 pm

It's been 24 hours since I sent the email to support. No response. Are they closed for the holiday?

beilmandesign · Post by **beilmandesign** » Tue Nov 25, 2014 7:19 pm

48 hours and no response from SeeMeCnc support. [email protected] is not working.

astroboy907 · Post by **astroboy907** » Tue Nov 25, 2014 9:32 pm

beilmandesign wrote:48 hours and no response from SeeMeCnc support. [email protected] is not working.

Give it time, as long as you are not getting mail undelivered errors...

BenTheRighteous · Post by **BenTheRighteous** » Wed Nov 26, 2014 9:46 am

I think at this point, whatever happens - favorable or otherwise - is 100% between you and SeeMeCNC. I feel like by maintaining this thread, you are turning this situation into a PR issue and putting SeeMe in a tight spot (maybe intentionally, maybe not).

In my short time here I've found that SeeMe is very engaged with their community and I'm quite sure you will not have escaped their attention. I don't know if you've ruffled any feathers, but it might help "unruffle" them if you promise in advance to keep the outcome private.

Post by **Eaglezsoar** » Wed Nov 26, 2014 10:57 am

BenTheRighteous wrote:I think at this point, whatever happens - favorable or otherwise - is 100% between you and SeeMeCNC. I feel like by maintaining this thread, you are turning this situation into a PR issue and putting SeeMe in a tight spot (maybe intentionally, maybe not).

In my short time here I've found that SeeMe is very engaged with their community and I'm quite sure you will not have escaped their attention. I don't know if you've ruffled any feathers, but it might help "unruffle" them if you promise in advance to keep the outcome private.

Thanks for your comments and I agree 100%.

beilmandesign · Post by **beilmandesign** » Wed Nov 26, 2014 4:58 pm

You are correct Mr. Ringmaster & it is positive PR for SeeMeCNC. They helped me out & I am most appreciative. My kit arrived, and its time to focus on suppressing the burnt melamine odor (for my wife), starting the assembly and immersing myself in this excellent kit. And I have to add, I have a few engineers at work very interested in the Rostock MAX. Like myself, the kit makes sense from both a design and upgradability standpoint.

PS.
Don't forget about the awesome discounts they are offering this week.

Jimustanguitar · Post by **Jimustanguitar** » Fri Nov 28, 2014 12:08 am

beilmandesign wrote:My kit arrived, and its time to focus on suppressing the burnt melamine odor (for my wife)

You'll miss that smell soon

Chrissi · Post by **Chrissi** » Fri Nov 28, 2014 8:19 am

Ah those were the days...

Chrissi · Post by **Chrissi** » Fri Nov 28, 2014 3:37 pm

Ha ha ha ha....
Perfect example of this thread; I ordered a nice brandy dandy new E3DV6 hot end and couple of days ago and today, Filistruder introduced the two new dual filament E3D hot ends, in fact at a sale introductory price only $10 more than the single one I ordered, did I cry?(much) No! ...did I stomp my feet?(more than a few times)No!
I will have my hands full just mounting and calibrating a single hot end, when I have it working perfectly and have exhausted the possibilities of a single hot end I can think of what I might need a dual hot end for, maybe by then they'll have V26 or so and I'll be ready for it?

Post by **Eaglezsoar** » Fri Nov 28, 2014 3:47 pm

Chrissi wrote:Ha ha ha ha....
Perfect example of this thread; I ordered a nice brandy dandy new E3DV6 hot end and couple of days ago and today, Filistruder introduced the two new dual filament E3D hot ends, in fact at a sale introductory price only $10 more than the single one I ordered, did I cry?(much) No! ...did I stomp my feet?(more than a few times)No!
I will have my hands full just mounting and calibrating a single hot end, when I have it working perfectly and have exhausted the possibilities of a single hot end I can think of what I might need a dual hot end for, maybe by then they'll have V26 or so and I'll be ready for it?

Great attitude!

Chrissi · Post by **Chrissi** » Fri Nov 28, 2014 3:54 pm

and as soon as I hit the send button for the last message, it arrived. Nice piece of kit this hot end is.

Squibbles · Post by **Squibbles** » Fri Nov 28, 2014 6:03 pm

I made a mental note a month or so ago to check back and see if there was going to be any black friday sales here. Glad I remembered to check today! Just ordered a Rostock Max v2

Now I need to get my room organized so I have somewhere to build it!

Post by **Eaglezsoar** » Fri Nov 28, 2014 6:37 pm

Squibbles wrote:I made a mental note a month or so ago to check back and see if there was going to be any black friday sales here. Glad I remembered to check today! Just ordered a Rostock Max v2 Now I need to get my room organized so I have somewhere to build it!

Welcome to the Forum.
If you get a chance during the build take a few pictures and send them to this Forum so we can enjoy them.
A build log would be better but I understand that a lot of builders just want to build and not document everything.
We will be here to answer questions you may have and I wish you the best on your build. The anticipation will
grow stronger each day until it is delivered to you.
Happy Building!

noishi · Post by **noishi** » Tue Dec 02, 2014 10:28 am

Proud to say after lurking in the shadows of these forums for months, I finally took the plunge and ordered a Rostock! I actually was so excited, I ordered it at midnight WEDNESDAY night, I might have been the first person to place an order

Got my shipping confirmation, now just reading, and re-reading the manual until it arrives!

Welcome to the SeeMeCNC Community

Don't buy That Machine Until 11/27

Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27

Re: Don't buy That Machine Until 11/27