6 pin main power problem

Having a problem? Post it here and someone will be along shortly to help
Post Reply
jake
Prints-a-lot
Posts: 24
Joined: Tue Jan 01, 2013 5:45 pm

6 pin main power problem

Post by jake »

my power supply only has two yellow wires on the 22pin and the instructions ask for 3
Top
User avatar
cambo3d
ULTIMATE 3D JEDI
Posts: 1057
Joined: Thu Feb 07, 2013 10:03 pm
Location: Florida

Re: 6 pin main power problem

Post by cambo3d »

you can use any of the 12v yellow wires from the pc supply.
Top
User avatar
aehM_Key
Printmaster!
Posts: 200
Joined: Sun Nov 18, 2012 4:46 am
Location: Germany
Contact:
Contact aehM_Key

Re: 6 pin main power problem

Post by aehM_Key »

You can take yellow wires from every connector.

EDIT: To late ;)
Top
jake
Prints-a-lot
Posts: 24
Joined: Tue Jan 01, 2013 5:45 pm

Re: 6 pin main power problem

Post by jake »

ware else would be 12v?
EDIT: thank you did not see your EDIT
Top
Post Reply

Return to “Troubleshooting”