Hi, from Montreal/Canada

Introduce yourself to the community!
Post Reply
Schneider
Plasticator
Posts: 13
Joined: Sun Mar 03, 2013 9:58 am

Hi, from Montreal/Canada

Post by Schneider »

Just wanted to say i'm really impressed with the Rostock MAX, and it will probably be my first one :). BTW, english isn't my first language, so do not be too surprised if i write like a 6 years old :P..
Schneider
Plasticator
Posts: 13
Joined: Sun Mar 03, 2013 9:58 am

Re: Hi, from Montreal/Canada

Post by Schneider »

Its official, the rostock max is my first. Just ordered mine :)! I'm somewhat nervous about the 300mm glass going into the mail thought.
johnoly99
Printmaster!
Posts: 709
Joined: Mon Mar 26, 2012 1:07 pm
Location: Goshen, IN

Re: Hi, from Montreal/Canada

Post by johnoly99 »

Schneider, Congrats! And welcome aboard. Don't worry, as long as you don't laugh at my autocorrected/mispelled words, we'll ignore your english :)

The glass ships no prob. It comes in a box with the onyx, havn't had one break yet. Although the edges can chip easily, havn't had one break yet (fingers crossed)
User avatar
Flateric
Printmaster!
Posts: 811
Joined: Fri Feb 15, 2013 4:35 pm
Location: Calgary, Alberta

Re: Hi, from Montreal/Canada

Post by Flateric »

Hey mine made it here to Calgary no problems, even through that huge storm AND despite UPS's best efforts to test it's durability.
"Now you see why evil will always triumph! Because good is dumb." - Spaceballs
Schneider
Plasticator
Posts: 13
Joined: Sun Mar 03, 2013 9:58 am

Re: Hi, from Montreal/Canada

Post by Schneider »

Thank you for the good words! I didn't asked for UPS, but USPS, so i don't know how it will go. UPS rates and after charges are usually out of my reach anyway :)..
Schneider
Plasticator
Posts: 13
Joined: Sun Mar 03, 2013 9:58 am

Re: Hi, from Montreal/Canada

Post by Schneider »

I just received my Rostock! Woohoo!

Beginning assembly right away :D..
Post Reply

Return to “New Member introduction”