Help! Printing issues.

Discussions related to the Rostock MAX v2
Post Reply
1dcs
Plasticator
Posts: 7
Joined: Thu Feb 05, 2015 7:42 pm

Help! Printing issues.

Post by 1dcs »

I had a power failure during a print. After rebooting laptop and Rostock Max, I reloaded file to print, pressed the print button but nothing happens. It's stuck on "homing axis". The only thing a can do is disconnect and reconnect. Any help would be appreciated.
Top
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7159
Joined: Sun Apr 01, 2012 5:26 pm

Re: Help! Printing issues.

Post by Eaglezsoar »

1dcs wrote:I had a power failure during a print. After rebooting laptop and Rostock Max, I reloaded file to print, pressed the print button but nothing happens. It's stuck on "homing axis". The only thing a can do is disconnect and reconnect. Any help would be appreciated.
Try unplugging the printer from the power for 10 seconds then see if all is normal, let us know the results.
Top
Post Reply

Return to “Rostock MAX v2”