Still Working on it.
Still Working on it.
Hasn't been the simple kit I expected.
- Eaglezsoar
- ULTIMATE 3D JEDI
- Posts: 7159
- Joined: Sun Apr 01, 2012 5:26 pm
Re: Still Working on it.
Welcome to the Forum!
The kit can take awhile to build and calibrate but you will feel great satisfaction when you turn on the power.
The kit can take awhile to build and calibrate but you will feel great satisfaction when you turn on the power.
-
- Printmaster!
- Posts: 123
- Joined: Wed Mar 05, 2014 9:53 pm
- Location: Cooley Springs,SC
Re: Still Working on it.
Definitely not simple, but parts are of high quality, the manual is awesome, and you have a band of helpers here! Forums describe it as a 20-30 hour build, plus calibrating afterwards. I see that as about the norm. Keep at it, don't loose hope!! The end is near! 

Distributor of SeeMeCNC in South Carolina
- mvansomeren
- Printmaster!
- Posts: 207
- Joined: Mon Jan 26, 2015 1:18 pm
- Location: Northridge, CA
Re: Still Working on it.
I didn't find the build particularly difficult. It took me 12hrs, 26 min to build. I had to travel so I couldn't get straight to the calibration but I did that today and it took about 1hr 45 min. It was a lot of fun!
___________________________________________________
Proud owner and builder of the Rostock MAX V2
Corsair RM750 PSU, Stepper Motor Dampers, Stock Hotend.
Proud owner and builder of the Rostock MAX V2
Corsair RM750 PSU, Stepper Motor Dampers, Stock Hotend.