threadlock on nut

Having a problem? Post it here and someone will be along shortly to help
Post Reply
Jamesthiago
Plasticator
Posts: 7
Joined: Sat Feb 28, 2015 3:40 am

threadlock on nut

Post by Jamesthiago »

Part way through a print today the hot end ring spacer nut started to rattle (fig 11-24 of rostock v2 max assembly)
Could I retighten, but also drop a bit of blue threadlock on it? or would this not be a good idea

Thanks
James
Top
geneb
ULTIMATE 3D JEDI
Posts: 5358
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:
Contact geneb

Re: threadlock on nut

Post by geneb »

Won't hurt it at all.

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Top
Post Reply

Return to “Troubleshooting”