Rostock V1 temperature setting of heat rod

Having a problem? Post it here and someone will be along shortly to help
Post Reply
fuhao1995323
Prints-a-lot
Posts: 29
Joined: Tue Apr 14, 2015 2:09 pm

Rostock V1 temperature setting of heat rod

Post by fuhao1995323 »

Hi guys,

We are stuck on the test cube. We are using ABS right now and our settings in the configure of slicer is 235(heat rod) and 80(heat bed)

But! Everytime we start printing, the default temperature of the rod will decrease to 200 and start to print. Then, it will increase temperature while printing.

Can anyone help?

Besides, ABS cannot adhere to the glass.......
Top
User avatar
Eaglezsoar
ULTIMATE 3D JEDI
Posts: 7159
Joined: Sun Apr 01, 2012 5:26 pm

Re: Rostock V1 temperature setting of heat rod

Post by Eaglezsoar »

Can you tell us what slicer you are using?
Abs normally requires glue sticks or unscented hair spray on the glass to help hold it.
See these links: http://forum.seemecnc.com/viewtopic.php?f=36&t=7361

http://forum.seemecnc.com/viewtopic.php?f=36&t=3808
Top
Post Reply

Return to “Troubleshooting”