Took me awhile, but i did it. Can't do it fully in ABS, yet. 2nd day trying to print PLA after the switch from ABS and this was my test. Surprisingly, i did it! Not 100%, but i'd say 95%. You can still c some light strings at the bottom...but it's barely noticeable. And a few strands on top.
The file is from McSlappy after watching his doodaddoes youtube channel...=) Printed using KISSlicer 1.5 Beta
[img]https://farm1.staticflickr.com/782/2050 ... 88c8_z.jpg[/img]
[img]https://farm6.staticflickr.com/5793/211 ... 9184_z.jpg[/img]
[img]https://farm6.staticflickr.com/5645/209 ... 4f29_z.jpg[/img]
excited, able to print the ice dome!!
Re: excited, able to print the ice dome!!
Hey man, that is really impressive. Good work!