Curious if anyone would be interested in this?

[Hdale85]

I'm working on building an all metal frame machine and so I have my Rostock Max V2 that I'm looking to get rid of minus the electronics. I have a carbon arm kit that I can include, it'll have all the wiring, the stock hot end, the extruder, etc. just no steppers, controller, and so on. Will also include the heated bed and glass. I was thinking like $300 + shipping in the lower 48 states. Picked up would be even better. I have a trick laser LED light ring, and a hot end LED kit. I can include those carbon arms assembled if wanted. These are just freebies I'm throwing in as I won't have much use for them in the new machine. Anyways if anyone is interested let me know, It'll all be setup to hook directly to a rambo as the connectors and everything will still be there. I could sell it complete for the right price I guess. But right now I'm interested in keeping the electronics for my new machine.

[Hdale85]

Or best offer of course, I won't have much use for the rest of it, steppers are pretty cheap like 50 bucks for a set of 4, and then whatever electronics you want. I'll leave the microswitches and all the wiring intact.

[Hdale85]

Tell you what, I would sell the entire machine complete with the genuine J-head (from hotends.com the creator) and all the various other pieces I've bought (including carbon arms, hardware kit for carbon arms from trick laser, trick laser zero backlash straps, etc etc) I will sell everything for 850 shipped obo to lower 48. I will even throw in a roll of hatchbox translucent orange PLA with it.

[Jimustanguitar]

I'm not your buyer, but I'm sure that pictures would help move it faster. Plus, I'm curious

[Hdale85]

Pretty standard looking lol. It's black only a few months old. It works, just want something with more print area, and want to build it my self completely. I think shipping it assembled shouldn't be too bad if I wrap it up pretty good with bubble wrap with some solid foam on top and bottom. I'll try and take a couple pictures in a few here, although all I have is a camera from my tablet lol.

[Hdale85]

[img]http://i24.photobucket.com/albums/c30/Dougie085/Rostock%20For%20Sale/IMG_20150917_2028101_zpsaqlgwlmj.jpg[/img]
[img]http://i24.photobucket.com/albums/c30/Dougie085/Rostock%20For%20Sale/IMG_20150917_2028541_zpsgj8alpvo.jpg[/img]
[img]http://i24.photobucket.com/albums/c30/Dougie085/Rostock%20For%20Sale/IMG_20150917_2032421_zpsyv9cdizm.jpg[/img]

Here you go, I've only had it a little while really, it's the newest version with all the newer parts. Includes the original hot end with mounting plate, I printed a plate for the J-Head. Has extra tinyfuse's for the rambo board, extra connectors that I used, has the 12" arm set from tridprinting, both of the LED light rings (one is white for the light under the hot end, the other lights up red to show hotend is being heated), and also the zero lash straps from tricklaser. I also have an extra pre-wired thermister that'll be included. Of course the fans that came with it are included as well just forgot to put them in the pic, I'll send them with the brackets that were printed for them.

[Hdale85]

Those rubberbands were temporary until I got springs but never got around to getting the springs lol. Then got the carbon arms and I believe the trick laser straps will fit around the carbon arms.

Also it's had 495.2m of filament ran through it. So it's still pretty new, I just want to build a machine from scratch and make it bigger.

[Hdale85]

How about 750 shipped lower 48? Or 800 and I'll include all the hatchbox abs I have as well as the orange pla. There is a roll of black transparent, red, and blue these rolls aren't full but are at least half, there'd and blue are probably 3/4. Knock 30 off for local pickup near Youngstown/Akron Ohio.

[DSteck]

Are you selling it complete OR minus electronics? Or are you only selling it totally complete now?

[Hdale85]

Dsteck, the last price was for the complete machine with the listed extras.

[Hdale85]

Well was bored over the weekend, so glued up the new arms and mounted them.

[img]http://i24.photobucket.com/albums/c30/Dougie085/CNC/IMG_20150922_1212591_zpsdcruxlga.jpg[/img]

Definitely a bit more solid now, less wiggle on the effector and seems to print smoother.

[Hdale85]

Sold

[Eaglezsoar]

I am glad that you got this sold.