EZStruder bowden on custom Delta skipping

Having a problem? Post it here and someone will be along shortly to help
Post Reply
oracledude
Plasticator
Posts: 7
Joined: Fri Oct 09, 2015 2:27 pm

Re: EZStruder bowden on custom Delta skipping

Post by oracledude »

I wound up slowing things down both on extrusion and retraction. I'll experiment ramping things up slowly to see how far I can stretch it. My print speed right now is 35mm/s and retraction is 3mm @ 30mm/s. When I switch back from the Volcano to the regular E3D, I'll speed things up a bit since the nozzle size is reduced (0.25/0.4/0.6 vs 0.6/0.8/1.0)
Top
User avatar
mhackney
ULTIMATE 3D JEDI
Posts: 5391
Joined: Mon Mar 26, 2012 4:15 pm
Location: MA, USA
Contact:
Contact mhackney

Re: EZStruder bowden on custom Delta skipping

Post by mhackney »

You should be able to go much faster than that with a .4mm nozzle. Slowing down is a bandaid hiding a problem.

Sublime Layers - my blog on Musings and Experiments in 3D Printing Technology and Art

Start Here:
A Strategy for Successful (and Great) Prints
Strategies for Resolving Print Artifacts

The Eclectic Angler
Top
Post Reply

Return to “Troubleshooting”