Rostock max v2 instruction error.

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
cadilovr
Plasticator
Posts: 5
Joined: Wed Nov 04, 2015 12:24 pm

Rostock max v2 instruction error.

Post by cadilovr »

So apparently the pictures on 96 and 100 are different for the top plate! That blows. Completely messed me all up.
Top
geneb
ULTIMATE 3D JEDI
Posts: 5358
Joined: Mon Oct 15, 2012 12:47 pm
Location: Graham, WA
Contact:
Contact geneb

Re: Rostock max v2 instruction error.

Post by geneb »

The heading page for Chapter 7 has a huge image on the 2nd half of the page. The description of that image is "Correct orientation of the Top Section Base Plate as viewed from the top surface."

g.
Delta Power!
Defeat the Cartesian Agenda!
http://www.f15sim.com - 80-0007, The only one of its kind.
http://geneb.simpits.org - Technical and Simulator Projects
Top
Post Reply

Return to “General Tips 'N Tricks”