New style effector

[Outsider]

I tried searching but had no luck. is there an STL file for the new style effector? I want another one but the SeeMeCNC site only sells a kit that also includes the arms(came with the printer).

[geneb]

The STL file should be on their github repo somewhere, but I bet if you email them they'll sell you any individual part you want.

g.

[Eaglezsoar]

The file is called 68304 platform by seemecnc.stl and is located here: https://github.com/seemecnc/RostockMAX/ ... emecnc.STL
I believe there is a top and bottom that are two different files.

[Outsider]

The file is called 68304 platform by seemecnc.stl and is located here: https://github.com/seemecnc/RostockMAX/ ... emecnc.STL
I believe there is a top and bottom that are two different files.

Sorry Eaglezsoar, my effector looks nothing like that. I have the new style with the nylon? ball joints.

Thanks for the idea geneb. I will email SeeMeCNC.

The unit comes apart so fast. I think it's a great design.
I want to make some hot ends that I can swap out fast, just pop off the arms and plug in the new hot end.

I have been searching Github and all I have found is this: https://github.com/seemecnc/RostockMAXv ... ints-1.STL

[nitewatchman]

Try this one, I think it is what you are looking for.