ABS juice for PETg bed adhesion

[gestalt73]

I was having bed adhesion issues with a recent large-ish PETg print with my PVA gluestick, so tried gluestick + ABS juice out of desperation.

Turns out it works really well.

I still haven't tried my PEI sheet, so don't know how it works with PETg.

[JFettig]

Pei will grip too hard. Very difficult to remove. PVA as taulman prescribed is the best. Glue all and water mix

[ccavanaugh]

I use PEI and PETG without too much issue. Don't squish the first layer. Bed and 70 -75C for small parts and 80C for larger parts. Pop the plate in the freezer and they release fairly easily.

[Glacian22]

I print a lot of PETG, and hairspray does the trick for me.