filament stuck in HE280 hotend -RostockMax v3

Having a problem? Post it here and someone will be along shortly to help
Post Reply
martins
Plasticator
Posts: 18
Joined: Fri Oct 07, 2016 8:29 am

filament stuck in HE280 hotend -RostockMax v3

Post by martins »

found today first failure after build:)
filament stuck in HE280

step 28 final assembly
The Bowden tube will fit nearly the entire length of the hot end, so make sure it's fully seated.

when i did it hangs at 20mm :) and should go deeper 43mm :) in HE280.
Top
Post Reply

Return to “Troubleshooting”