Screen going blank on occasion- 2 different rostocks
Posted: Sun Oct 30, 2016 11:45 pm
So i've been noticing an issue as of late, with not one, but two rostocks. First is a personal unit, second is a friend's. Both are v2's, one is slightly older, and has the older pin/axle style arms/carriages. Both have been upgraded to an E3d v6, and both are running 12v 30a PSU's, one of which is brand new. Both are having screen shutdowns at random times, which is...less than ideal. Mine is primarily used via SD card and interface, he has a dedicated computer. Both printers will continue to run after the screen shuts off. Problem seems to have emerged after upgrading firmwares within the last week. Any ideas?