Printable probe bracket
Posted: Thu Jan 12, 2017 12:06 am
Bracket I designed to use a common end stop switch for probing. Mounts to the MAX Metal Platform.
http://repables.com/r/815/
The calibration built into the dc42 firmware on the Duet board works wonderfully!
Fusion 360 and .step files also, so you can modify for other platforms.
http://repables.com/r/815/
The calibration built into the dc42 firmware on the Duet board works wonderfully!
Fusion 360 and .step files also, so you can modify for other platforms.