Page 1 of 1
Enclosure upgrade!
Posted: Mon Jan 23, 2017 3:28 pm
by barry99705
Re: Enclosure upgrade!
Posted: Mon Jan 23, 2017 6:26 pm
by AlanZ
I wonder how the extruder will do inside the chamber
Re: Enclosure upgrade!
Posted: Tue Jan 24, 2017 7:58 am
by barry99705
It's been in there for over a year with no issues. The mount is printed in abs. I only print in petg, and the few times I've printed in pla it's been fine as well.
Re: Enclosure upgrade!
Posted: Tue Jan 24, 2017 2:29 pm
by AlanZ
Glad to hear it. My enclosure is heated so I moved the extruder outside of the enclosure.
Re: Enclosure upgrade!
Posted: Tue Jan 24, 2017 7:28 pm
by barry99705
So far I've not really needed to add a heater. Depending on print time, it hovers around 80F inside.
Re: Enclosure upgrade!
Posted: Tue Feb 21, 2017 1:10 am
by ivanhandler
Looks great, do you have instructions on how to build one? Thanks
Re: Enclosure upgrade!
Posted: Tue Feb 21, 2017 7:41 am
by barry99705
Not really. I took the dxf files for the printer and cut along the outside of the base for the hole. Then I just cut is square to fit the enclosure I already had.