15 inch high Part
Posted: Fri Aug 04, 2017 1:19 pm
Hi everyone,
This is our first part, after a calibration cube. Very impressed for a 0.4 mm layer with 0.5 mm nozzle. We will try our 1 mm nozzle next time to do it with 0.8 mm layer.
Special thanks to Michael Hackney and his blog. Great tips !!!
Regards,
This is our first part, after a calibration cube. Very impressed for a 0.4 mm layer with 0.5 mm nozzle. We will try our 1 mm nozzle next time to do it with 0.8 mm layer.
- First try, 0.4 mm layer, 15 inch high
Regards,