Welcome to the SeeMeCNC Community

Hi Everyone,

I have been printing with the stock Rostock MAX V3 since December and am ready to change it up a bit. I have been able to reduce stringing and oozing after quite a bit of calibration, but I just bought a Titan Aero to ditch the Bowden tube. I have a few posts and searched online about this upgrade, but it seems that the machines that use it ditch their accel board in favor of FSR sensors for auto-leveling.

Has anyone got the Titan Aero working with the stock accel board? If not, can anyone provide advice on hooking up the FSR sensors to the RAMbo? I plan to upgrade to the Duet Wifi board in the future, but that is not in the cards at the moment.

Other upgrades in the works is a heated chamber, but definitely open to suggestion to increase my printer's reliability.

Thanks,
Matt G

I've got a Titan Aero with the accel board on an H2. Works great, but you have to remove the silicon cover from the nozzle when you probe.

Great, just confirming it has been done. Did you print a custom adapter to hold the Titan Aero and accel board? If so, I would be curious to see pictures and/or CAD files to use or get inspiration for my own build.

Image attached.

Even better. JJ posted the STL for the mount to repables: https://repables.com/r/861/