Page 1 of 1
First batch of Artemis is out the door.
Posted: Fri Dec 22, 2017 7:58 am
by pouncingiguana
We just finished shipping the first batch of Artemis, including the first RTP! Now we get to build up the parts and pieces to go for the next round. Guess I'd better finish the setup manual today before everyone starts building... it doesn't take much time to slap one together.
Re: First batch of Artemis is out the door.
Posted: Tue Jan 16, 2018 1:53 pm
by felich
I am the guy that received the RTP.
I am having no luck seeing the web page.
Please see my post "No joy with browser connection"
Thanks for any help you can provide.
Re: First batch of Artemis is out the door.
Posted: Wed Jan 17, 2018 7:45 am
by pouncingiguana
Please submit a support ticket (
https://seemecnc.zendesk.com/hc/en-us/requests/new?) and we'll get you up and going!
Re: First batch of Artemis is out the door.
Posted: Wed Jan 17, 2018 9:41 am
by ripacheco
Congratulations being so busy filling orders !
I know a few managers that would like to have your “ problem”
Re: First batch of Artemis is out the door.
Posted: Wed Jan 17, 2018 6:04 pm
by felich
SD chip wasn't seated properly.
AOK now.
Re: First batch of Artemis is out the door.
Posted: Wed Jan 17, 2018 6:06 pm
by dc42
felich wrote:SD chip wasn't seated properly.
AOK now.
There should be a positive click when the SD card is seated properly, then to get it out you have to push it again.
Re: First batch of Artemis is out the door.
Posted: Thu Jan 18, 2018 7:19 am
by pouncingiguana
Glad you're up and running. I'm going to add some documentation to have people check that when they are unpacking their printer.