CURA Slicer Center Object Setting

User-Generated tips and tricks for the Rostock Max, Orion, H1.1, or H1 Printers
Post Reply
User avatar
elqisqeyano
Printmaster!
Posts: 256
Joined: Sat Mar 30, 2013 1:29 pm
Location: Franklin County Ohio

CURA Slicer Center Object Setting

Post by elqisqeyano »

I found that if you go into File, Preference, Machine Settings, Maximum Width 10(mm), Maximum Depth 10(mm) and Maximum Z height at what ever height your platform is, will dead center your object. FWIW.

Namaste.
Top
Post Reply

Return to “General Tips 'N Tricks”