Welcome to the SeeMeCNC Community

Anyone know where this type of filament can be purchased in 1.75 mm? I tried Statisys but they say you can only purchase if you have one of their machines. I am looking for either PC/ABS or ABS Plus which is a lot stronger than reg ABS. I tried Nylon 618 and Nylon 645 but they warp way too much and are to rubbery and can not be sanded.

https://www.google.com/url?sa=t&rct=j&q ... 2109,d.b2I

or

http://store.3dprintingsystems.com/1.75 ... Snow_White

google is your friend

foshon wrote:https://www.google.com/url?sa=t&rct=j&q ... 2109,d.b2I

or

http://store.3dprintingsystems.com/1.75 ... Snow_White

google is your friend

Thanks Foshon. I tried many times to google to no avail. Now your my friend. Goodbye Google!

foshon wrote:https://www.google.com/url?sa=t&rct=j&q ... 2109,d.b2I

or

http://store.3dprintingsystems.com/1.75 ... Snow_White

google is your friend

One is Polycarbonate and the other site is ABS Plus. Not the blend I am looking for. I am looking for PC/ABS blend that is already combined into one filament called PC/ABS Blend.

That ABS Plus better, Stronger and more flexible, than regular ABS?

I know that Polycarbonate is good, but very difficult to print with.