Welcome to the SeeMeCNC Community

I bought the EZMount and put it together. Looks cool, sort of like a pergola, and supports many different spools.

The charred wood smell can be removed by scrubbing the sides with a dry steel wool pad and then wiping with a damp cloth.

Does anyone know if the object files are available for download? These parts should be printable on the Rostock Max.

[img]http://i.imgur.com/jXsYDJB.jpg[/img]
[img]http://i.imgur.com/KJKwfSy.jpg[/img]
[img]http://i.imgur.com/KivuTVL.jpg[/img]
[img]http://i.imgur.com/zfhdzu0.jpg[/img]

The mount looks great!

Your wire management however, is likely going to give me nightmares for some nights to come.

g.

I think it's pretty. Look at all the colors!

*runs screaming*

geneb wrote:Your wire management however, is likely going to give me nightmares for some nights to come.

The stepper isn't hooked up yet since the wire was about 1 foot too short.

jesse wrote:

geneb wrote:Your wire management however, is likely going to give me nightmares for some nights to come.

The stepper isn't hooked up yet since the wire was about 1 foot too short.

D'oh!