Welcome to the SeeMeCNC Community

Hello everyone,

I'm printing LIVE on our Ustream channel http://ustream.tv/channel/seemecnc.

I whipped this up the other day. I'll upload STL soon. Ever since Oly showed me that useful "Stubby Screwdriver" he printed from Thingiverse, I wanted to make a full size screwdriver.

This PartDaddy Screwdriver holds the "stubby screwdriver" in the handle. Then the stubby screwdriver retains bit-storage within the handle.

Here's a Solidworks graphic image of the screwdriver

With some advice from Oly, I'm printing using the following details:
The Slic3r configuration file: ~PartDaddy

Here's the STL of the PartDaddy "SeeMeCNC" screwdriver.

Cool! I am going to print one of these.
~*Brian V

That looks cool! I have to get my machine back up and running, too many upgrades at once .

Hey Partdaddy,

Slic3r won't process your screwdriver.

Brian, try scaling by 25.4 in slic3r. Alot of times thats the problem.

Unless I made a mistake, i'm trying to save all my STL's in Metric, so scale of 1 should be correc in Slic3r. I am also keeping mu STL resolution higher so people can print more accurately with less faceting.