Page 1 of 1
printing an 80mm tall yoda bust LIVE
Posted: Mon Apr 16, 2012 12:33 am
by guanu
.15mm layer height so this print will take a nice long time if anyone wants to watch...
I'm streaming live, log in and join the chat and I'll answer or show ya whatever you wanna see while it prints
http://www.ustream.tv/channel/guanu/
see ya there!
Guanu
Re: printing an 80mm tall yoda bust LIVE
Posted: Mon Apr 16, 2012 1:59 pm
by guanu
well the last print took 6 hrs 14 minutes, guess noone stays up that late to watch lol... but here's the result..
yoda, 80mm tall.. printed at .15mm layer height...
file I used was thingiverse 16309 yoda lite 100mm tall (I used 80% in slic3r since cross bars of my h-1 limit me to 88mm prints)
[img]
http://www.guanu.net/seemecnc/IMG_2218.JPG[/img]
full size pic:
http://www.guanu.net/seemecnc/IMG_2218.JPG
and to compare, here it is next to the yoda bust clean and simplified, thinigiverse 14104
the smaller yoda is printed at 100% scale, .3mm layer height..
[img]
http://www.guanu.net/seemecnc/IMG_2217.JPG[/img]
full size pic:
http://www.guanu.net/seemecnc/IMG_2217.JPG
Guanu