Welcome to the SeeMeCNC Community

[img]https://fbcdn-sphotos-h-a.akamaihd.net/ ... 7225_n.jpg[/img]

No prize, just street cred.

Thought you'd enjoy the funny picture

"If you're gonna screw around, you NEED one of these!"


"This is my bolt! There are many like it, but this one is mine!"

g.

"If you think you have enough filament, you're screwed."

"Screw it, just buy a Rostock Max V2!"

"Our machines are easily built by the visually impaired"

"Don't get screwed, Buy a Rostock Max V2"

"This is a prototype bolt for our self-assembly of our next printer: the Rostock MaxZilla".

We've upp'd our quality, now up yours!

"It only takes four minutes to print one of these. Show you? No, to see that, you've got to buy the printer."

"What, you don't want to buy one? Well then have this"

"I seem to be missing a nut."

"... and it's ribbed for her pleasure!"

"Yeah...occasionally you'll have a left over bolt after you finish assembly...no big deal."

My nuts are huge too!

barry99705 wrote:My nuts are huge too!

That's good!~

I thought it was missing a nut also but then I saw John holding it!

"Ironically, we need to finish our newest model printer to print the spanner for this set screw for that printer"

JohnStack wrote:"It only takes four minutes to print one of these. Show you? No, to see that, you've got to buy the printer."

Maybe 4 minutes to print the bolt but forever to print the nut, they haven't figured out how to print a John Oly.

Eaglezsoar wrote: they haven't figured out how to print a John Oly.

*looks at the pile of failed John Oly prints*


*Shudders*

Why are they still moving?!

"It is important to remember the dimensions you designed your part in. Centimeters are not equal to inches."

"We are working with Filabot to create a 50mm filament extruder. While this is not the final material to be used it does give you an idea of the brass nozzle we will use for the filament maker."

Dear lord Vader,
My name is John Oly, and all of us here at SeeMee CNC are very interested in securing your government contract! Our engineers have designed this special bolt to hold down our proprietary exhaust port cover shield. Obviously we can't reveal all of our secrets as to how this shield may work; sufficed to say it's about the size of a womp rat, and attaches with these custom bolts. We hope that seeing this prototype demonstrates our earnest desire to be part of the Death Star team!

sincerly,


SeeMe CNC

carter wrote:Dear lord Vader,
My name is John Oly, and all of us here at SeeMee CNC are very interested in securing your government contract! Our engineers have designed this special bolt to hold down our proprietary exhaust port cover shield. obviously we can't reveal all of our secrets as to how this shield may work, but we hope that seeing this prototype demonstrates our earnest desire to be part of the Death Star team!

sincerly,


SeeMe CNC

Winner!!

Yep, it's official, that's the winner right there

Good job barry99705!