My Rostock MAX v2 Prints
Posted: Tue Apr 29, 2014 1:35 pm
I've been torn on if this belongs under "What are YOU making" or here under "Rostock MAX v2", if a mod would like to move it, please do, and thank you.
I was fortunate enough to pick up an assembled v2 a couple of weekends ago.
I've had a short history in 3d printing, repairing a Makerbot Cupcake and building an Eventorbot, both of which had severe issues.
I dont feel like I would do the machine justice in an comprehensive review, I am *not* qualified.
I dont feel my prints are up to the quality that a seasoned vet could coax out of the machine.
That said, I've been printing some stuff, and making a few models including a makerbeam / iphone holder for the bot here:http://www.thingiverse.com/thing:313195.
Most every print was printed at 30mm/s, however I regularly used the LCD to boost the speed of the print. Its been as high as 300%, I've been settling in at 225% or so for simple prints.
Have a look at my thingiverse profile for an uptodate list of prints / designs.
http://www.thingiverse.com/grahampheath/overview
I was fortunate enough to pick up an assembled v2 a couple of weekends ago.
I've had a short history in 3d printing, repairing a Makerbot Cupcake and building an Eventorbot, both of which had severe issues.
I dont feel like I would do the machine justice in an comprehensive review, I am *not* qualified.
I dont feel my prints are up to the quality that a seasoned vet could coax out of the machine.
That said, I've been printing some stuff, and making a few models including a makerbeam / iphone holder for the bot here:http://www.thingiverse.com/thing:313195.
Most every print was printed at 30mm/s, however I regularly used the LCD to boost the speed of the print. Its been as high as 300%, I've been settling in at 225% or so for simple prints.
Have a look at my thingiverse profile for an uptodate list of prints / designs.
http://www.thingiverse.com/grahampheath/overview