Page 1 of 1
Video about assembly and first experiences
Posted: Sat May 17, 2014 8:31 am
by flexman
Dear folks,
I made a video how I assembled by Rostock Max v2 with my experiences during the build process up to the first prints. It is really a great machine!
http://youtu.be/_k1eKH0_fR4
Regards,
flexman
Re: Video about assembly and first experiences
Posted: Sat May 17, 2014 9:06 am
by gajtguy
Excellent video. Very impressive how you documented the entire process. I watched the whole thing. It was like building it all over again.
Enjoy your new printer.
Re: Video about assembly and first experiences
Posted: Sat May 17, 2014 11:11 am
by heathenx
Well done, flexman.
Re: Video about assembly and first experiences
Posted: Sat May 17, 2014 11:25 am
by JohnStack
This was excellent. Well done!
Re: Video about assembly and first experiences
Posted: Sat May 17, 2014 12:49 pm
by Eaglezsoar
Very good video, even the music was cool. Thanks for sharing with us.
Re: Video about assembly and first experiences
Posted: Sun May 18, 2014 3:38 am
by Elysio
Hi Flexman.
Thank you for this impressive making of !
I felt every second again of building my own Max, while watching the video.
I guess you are speaking german, maybe we can share some impressions via Phone.
Will write you a PM.
Bye.
Re: Video about assembly and first experiences
Posted: Sun May 18, 2014 5:30 pm
by flexman
Thank you guys for the warm welcome.
For the timelapse, I took a picture every 4 seconds with our SLR camera on a tripod and then used mencoder to make a video.
Regards
Re: Video about assembly and first experiences
Posted: Sun May 18, 2014 10:24 pm
by Tinyhead
Excellent video! Thanks for taking the time to do that. Really cool. I like how all the errors and hiccups are timed and documented too.