Part printed for a client.
- orange ABS
- E3D V5 w/0.40mm nozzle
- 100 micron layers
- printed at 10mm/s
- printed at 260 Celsius to improve layer adhesion
- part fan at 50%
- supports carefully removed
[img]http://i.imgur.com/qih9CpW.jpg[/img]
Tiny Tiny Tiny!
Tiny Tiny Tiny!
Last edited by gestalt73 on Fri May 23, 2014 11:51 pm, edited 1 time in total.
-
McSlappy
- Printmaster!
- Posts: 800
- Joined: Wed Dec 11, 2013 9:11 pm
- Location: Queensland, Australia
- Contact:
Re: Tiny Tiny Tiny!
Wow, that's excellent! .4mm nozzle?
I loved my Rostock so much I now sell them in Oz 
Re: Tiny Tiny Tiny!
Yep. a stock E3D V5 setup with the 0.40mm nozzle. updated first post.
-
McSlappy
- Printmaster!
- Posts: 800
- Joined: Wed Dec 11, 2013 9:11 pm
- Location: Queensland, Australia
- Contact:
Re: Tiny Tiny Tiny!
Brilliant! I'd never have even guessed you could make something so tiny and accurately with the stock .4mm even from the e3d. I've yet to really do much with my .25mm - if this is possible with .4mm now I'm excited!
I loved my Rostock so much I now sell them in Oz
-
Demolishun
- Printmaster!
- Posts: 147
- Joined: Wed May 07, 2014 4:28 am
- Location: SE Idaho, USA
Re: Tiny Tiny Tiny!
Cool cool cool!
That is very impressive. Good job!
That is very impressive. Good job!
Challenge yourself and be a more awesome you.