Super mysterious tease of my largest print ever

[McSlappy]

I'll apologise in advance for just teasing this without proper details, but I was so happy to have it done (since it's the result of finally getting PLA to print nicely from my e3d V5) that I have to tell someone who will understand my pain

I need to finish the pieces and glue it all together but the print consists of:
• 8 parts, most of which took up the full build plate size
• print times ranged from 10 to 20 hours each
• 3 full rolls of black PLA even with huge cavities cut out of each to save filament
• print speeds ranging from 30 to 80mm/s.
• 0.6mm nozzle diameter
• over 100 hours of printing time

Don't worry I need to have this finished this week so I'll be showing pics soon

Again, sorry for the rotten tease.

*UPDATE*
Check out the final product!! On this post here:
http://forum.seemecnc.com/viewtopic.php?f=41&t=5650

[Flateric]

But yet you do it anyways. And your avatar makes me think your not all that sorry! LOL

[JohnStack]

I just bought a Ferrari.

[McSlappy]

Ha ha... No I'm sorry somewhat and if I weren't so excited at printing PLA I wouldn't have done this

...or would I?

Well I just now tried to take a photo to show just a small segment, but there's really nothing I can photograph of it that wouldn't give the whole thing away :/ Man I should just be quiet, I feel I'm digging a hole here.

[rippedmittens]

Cant wait to see .

[forrie]

[img]http://www.thesydneyshadowsclub.com.au/ ... shovel.jpg[/img] Is it Bill? Hurry up hurry up....lol

[Tinyhead]

Hurry up with the pics Slappy! I want to see just how massive this is that it takes 3 rolls of filament!

[Demolishun]

Is that why I found a 3D scanner mounted above my toilet?!

I knew it! You are printing my arse! Wait, no, that would take WAY more than 3 rolls of PLA...

[McSlappy]

[img]http://www.thesydneyshadowsclub.com.au/ ... shovel.jpg[/img] Is it Bill? Hurry up hurry up....lol

Oh man that brought back memories....

Ha ha, I'm getting closer It's 95% glued and I'll paint it tomorrow!

[rippedmittens]

Hurry up miss Jane was blackboards line

[Captain Starfish]

Did the blackboard ever say "Miss Jane", though, or was that just Mr Squiggle?

lol, spot the aussie in this thread!

[McSlappy]

You know I don't recall.... I know blackboard was really impolite so I doubt he'd say 'miss jane'

[rippedmittens]

I stand corrected lol Mr squiggle would do the "hurry up miss jane" trying to get his rocket door open.and black board was just "Hurry up"

[McSlappy]

"trying to get his rocket door open"... That show and Agro's Cartoon Connection... They weren't kids shows at all!

[Captain Starfish]

Agro was a durrrty, durrrty little bugger.

Anyway - where's some photos of this megamuffinmcprintypants?

[McSlappy]

Yeah man, he was completely kid-inappropriate!

Well it's now painted, I'm getting my sister to shoot some photos of it and I'll upload them in the morning

[Demolishun]

McSlappy needs to be McSlapped!

WHAT IS IT?! You are killing me with anticipation!

[McSlappy]

http://forum.seemecnc.com/viewtopic.php?f=41&t=5650

I've updated the first post with this too. Check it out!