Page 1 of 1
Gale Crater...
Posted: Fri Jul 25, 2014 5:44 pm
by geneb
This is one of the 3D models that NASA recently released.
http://www.geneb.org/images/gale-crater.png
Took about 5 hours to print with a "true" .4 j-head at .15 layer height.
g.
Re: Gale Crater...
Posted: Fri Jul 25, 2014 5:50 pm
by imagebuff
Very nice. How large is the print? Wonder what the scale is.
Chris
Re: Gale Crater...
Posted: Sun Jul 27, 2014 12:13 am
by geneb
It's roughly 140mm x 105mm.
g.
Re: Gale Crater...
Posted: Sun Jul 27, 2014 1:25 am
by Generic Default
That picture is your print? There are no visible layer marks or retraction marks and it looks like it was cast in polyurethane or something. Really nice print!
Re: Gale Crater...
Posted: Sun Jul 27, 2014 3:31 pm
by geneb
Thanks. I sliced it with Cura 14.04 as my current copy of Kisslicer literally dies when it tries to slice the model.
The j-head is a "real" one from hotends.com and has proven time and time again to be THE best for PLA.
g.
Re: Gale Crater...
Posted: Mon Jul 28, 2014 10:00 am
by DavidF
Well that makes me want to run out and buy a real J head. Very nice print and a very cool idea.