Page 1 of 1
Printer settings for Slic3r 1.1.7
Posted: Sun Sep 28, 2014 9:52 pm
by RAMTechRob
For the printer settings tab on a Delta Orion, what should my setting be for
Bed Size X - Y-
Print Center X- Y-
I can;t find anyway to change it to a 75mm radius.
Re: Printer settings for Slic3r 1.1.7
Posted: Tue Sep 30, 2014 12:41 pm
by RAMTechRob
Anyone know?
Re: Printer settings for Slic3r 1.1.7
Posted: Tue Sep 30, 2014 12:59 pm
by guanu
the bed size is for visualization so its not needed to be exact, I have mine at 150x150... but as far as print center, it should always be at 0,0 so that objects are always in the center of the bed...
Guanu
Re: Printer settings for Slic3r 1.1.7
Posted: Tue Sep 30, 2014 1:07 pm
by RAMTechRob
OK, I will give that a try. I am trying to print a phone case and its telling me its too big.
Re: Printer settings for Slic3r 1.1.7
Posted: Wed Oct 01, 2014 6:40 pm
by RAMTechRob
I changed the Radius to 82 and it gave me just enough to print a phone case.