60mm "Wargaming" Model Bases and a gyro thing.
Posted: Tue Nov 18, 2014 6:51 pm
Scaled up from these 40mm ones from thingiverse.
Grey filaments.ca creative series ABS at 100 micron layers, stock .5mm nozzle (basically stock everything). Printed at "150mm/s" infill, 90 perimters. In quotes because I think the jerk and acceleration values are not enabling the true full speed. Approx 8 hour print time.
Also did this one in about 2 hours... 2 and a half maybe. 200 micron layers, all "150"mm/s.
[/skynet injection code]
Grey filaments.ca creative series ABS at 100 micron layers, stock .5mm nozzle (basically stock everything). Printed at "150mm/s" infill, 90 perimters. In quotes because I think the jerk and acceleration values are not enabling the true full speed. Approx 8 hour print time.