Page 1 of 1
Weezel here
Posted: Wed Nov 26, 2014 6:51 pm
by Weezel
Hey all,
I've been interested in 3d printing for a few years now, but finally bought my Rostock v2 max in October. It's pretty much complete at this point, I just finished levelling the bed. It's been awesome!
Re: Weezel here
Posted: Wed Nov 26, 2014 8:08 pm
by bot
Welcome. You are going to love your Rostock and be impressed by its capabilities, even when bone stock.
Re: Weezel here
Posted: Thu Nov 27, 2014 9:25 am
by Weezel
I put on some stepper motor dampers, and have been crimping connectors on wires where it makes sense.
I'm really glad that I got the max, because I've been able to learn so much during the build process!
Re: Weezel here
Posted: Thu Nov 27, 2014 10:21 am
by BenTheRighteous
You bought it in October and are just finishing it now?! Oh man! When I got mine I could barely stand the 2 weeks it took to get mine put together!
Anyway, congratulations and welcome.
Re: Weezel here
Posted: Thu Nov 27, 2014 11:41 am
by Weezel
Yeah, I could barely stand it too! I typically have an hour or so a night to work on it, so it was slow going.
Re: Weezel here
Posted: Thu Nov 27, 2014 11:55 am
by Eaglezsoar
Hi Weezel! I would like to welcome you to the forum!
Please use us to help with questions you have and please send us pictures of your printer.
If you know the answer to questions you see posted please jump in and share your knowledge.
Happy Printing!
Re: Weezel here
Posted: Mon Dec 01, 2014 9:17 pm
by Weezel
Well, she's all calibrated... and I'm about to print the first PEEK fan shroud!
It looks like the nozzle is oozing a bit... I'm guessing that's normal? My plan is to extrude 20mm or so, and then wipe the nozzle right as I hit the run button after the bed has heated up all the way.
Man the nozzle gets up to temp fast!