Be careful with the psus ;)
Posted: Thu Jun 14, 2012 9:17 pm
So , i was fooling around in mach, when i started to see smoke 
two wires were touching the parallel port and shorted out. Everything is OK. needless to say after that everything got taped up. Everything seems to still work fine my main concern was the 4 axis board as i have another psu to spare. 
two wires were touching the parallel port and shorted out. Everything is OK. needless to say after that everything got taped up. Everything seems to still work fine my main concern was the 4 axis board as i have another psu to spare.