Welcome to the SeeMeCNC Community

Hi there,

It seems my nozzle is broken, the diameter is way bigger than 0.5mm now, i may or may not have crashed it into the heated bed when messing with the Z height. What do i have to keep in mind when buying spare nozzles? Will any 0.5mm diameter 3d printer nozzle fit?

Something like this:

http://www.ebay.de/itm/0-5mm-Extruder-D ... 35e442578a[/b]

Or does anyone know any good sources in europe?

If you are using the stock, SeeMeCNC hotend, no. The stock hotend uses a nozzle with 3/8-24 threads, and it also supports the teflon liner inside the hotend.

Here's a European distributor http://eshop.futur3d.net/en/hotend-nooz ... stock.html

Thanks!

I wrote them a mail asking about the shipping price. According to their shop it's 15+€ to germany, so one nozzle would cost me almost as much as 2 nozzles cost me from seemecnc. I hope we can work something out.