Page 1 of 1
First Build, LCD is not powering on.
Posted: Tue Feb 03, 2015 11:18 pm
by 3amjosh
I've just finished the build that I started last Monday, and I've taken my time and been super slow. You can imagine the level of discouragement I got when I powered on and the LCD didn't light up. I've reseated the cables and connections on the board but still no go. Any other tips or ideas?
Re: First Build, LCD is not powering on.
Posted: Tue Feb 03, 2015 11:31 pm
by BenTheRighteous
What fans run when you turn on the printer? Psu? Rambo?
Re: First Build, LCD is not powering on.
Posted: Tue Feb 03, 2015 11:40 pm
by 3amjosh
Both fans are running.
Re: First Build, LCD is not powering on.
Posted: Tue Feb 03, 2015 11:49 pm
by 3amjosh
BenTheRighteous wrote:What fans run when you turn on the printer? Psu? Rambo?
Cables on board were upside down. All good now!