Page 1 of 1
Biggest print (surface area) to date...
Posted: Thu Feb 26, 2015 8:50 pm
by 0110-m-p
Printed this for a client on 3DHubs. End product is a prototype so I don't want to show it, but the base is 200x190mm. One corner is a bit thin, but the hole thing printed no problem.
[img]
https://farm9.staticflickr.com/8618/166 ... c458_b.jpg[/img]
Re: Biggest print (surface area) to date...
Posted: Thu Feb 26, 2015 9:23 pm
by mvansomeren
Nice!
Re: Biggest print (surface area) to date...
Posted: Thu Feb 26, 2015 9:27 pm
by Nylocke
Very Impressive.
Re: Biggest print (surface area) to date...
Posted: Fri Feb 27, 2015 1:08 pm
by 0110-m-p
Was impressed that it didn't warp or lift off the bed at all. That was my biggest concern.
Re: Biggest print (surface area) to date...
Posted: Fri Feb 27, 2015 4:22 pm
by craftymethod
ABS? what size filament?
Re: Biggest print (surface area) to date...
Posted: Fri Feb 27, 2015 5:04 pm
by BenTheRighteous
That has GOT to be PLA. No visible goop on the bed, no PEI, no enclosure, no brim... my jaw will hit the floor if you tell me that's ABS.
Re: Biggest print (surface area) to date...
Posted: Sun Mar 01, 2015 7:13 pm
by 0110-m-p
Yes, it is actually ABS. IC3D 1.75mm red ABS. Finished part was 5mm thick.
Re: Biggest print (surface area) to date...
Posted: Sun Mar 01, 2015 7:32 pm
by craftymethod
nice work!
Re: Biggest print (surface area) to date...
Posted: Sun Mar 01, 2015 7:53 pm
by Mac The Knife
Next contest,,,, Who can print the largest. With ABS.