Carl from Virginia

[carlsgems]

Hey 3D ers, I am taking the plunge and new to the 3D resin dlp printing. Built the droplit kit and would love some info on now setting it up with the firmware and projector with the best route to take, thought about skimming info an a few of the other dlp printers hoping similar process I could glean some tips or answers on set up.

Thanks

Carl

[Eaglezsoar]

Hi Carl!
Welcome to the Forum.
One of the best threads for the droplit is here: http://forum.seemecnc.com/viewtopic.php?f=42&t=6190
I hope this helps out!

[carlsgems]

Thanks a bunch, I was able to update firmware now to get my head around creation work shop. The printer kit makes for a very well built printer. I look forward to get printing and maybe see if I can get some castable resins. my interest started when I was researching one for I shop I work at, I have experience in CNC milling but wanted a way to show clients models before they are produced in metal. To also see things that might need to be changed before in my CAD.

Again Thanks