Welcome to the SeeMeCNC Community

Hey guys,

I ordered an E3D V6 to upgrade my RoStock Max V2 but am having troubles finding a guide. Can someone point me in the right direction? Also, there is a store credit available to anyone that has a guide. T

Do this: http://wiki.e3d-online.com/wiki/E3D-v6_Assembly

then print this: https://www.thingiverse.com/thing:137140

Read this if need be: http://forum.seemecnc.com/viewtopic.php ... 63&p=67981

TFMike wrote:Do this: http://wiki.e3d-online.com/wiki/E3D-v6_Assembly

then print this: https://www.thingiverse.com/thing:137140

Read this if need be: http://forum.seemecnc.com/viewtopic.php ... 63&p=67981

Thank you, sir! Very much appreciated!