Welcome to the SeeMeCNC Community • Gas Turbine Rotor Wheel

Page 1 of 1

Gas Turbine Rotor Wheel

Posted: Sun Jun 07, 2015 1:23 pm

by Khalid Khattak

Just took 3Hrs. ABS, slicer CURA

Re: Gas Turbine Rotor Wheel

Posted: Sun Jun 07, 2015 2:25 pm

by Eaglezsoar

Very good prints! Have a gas with it!

Re: Gas Turbine Rotor Wheel

Posted: Sun Jun 07, 2015 4:18 pm

by Khalid Khattak

yes i will have a gas..but will not lit it up

Re: Gas Turbine Rotor Wheel

Posted: Mon Jun 08, 2015 8:07 am

by Jimustanguitar

What is your printer? Looks like a metal effector with magnetic arms and an inductive z-probe.

Re: Gas Turbine Rotor Wheel

Posted: Mon Jun 08, 2015 2:45 pm

by Khalid Khattak

Yes you are right. You can see the details here:
http://forum.seemecnc.com/viewtopic.php?f=6&t=7078