Page 1 of 1
steppers skipping by theselves?
Posted: Sun Sep 23, 2012 4:44 pm
by tom10122
so, my resistors went and I was waiting for new ones, popped them in and started printing again and I had skew! Didn't touch any thing else, the previous print was great with no skew, I can hear the steppers making a thud, sorta like , dun dun dun , is this the steppers skiping? They did it even with no belt on them(FYI it's only the x and y steppers
Re: steppers skipping by theselves?
Posted: Mon Sep 24, 2012 8:10 am
by johnoly99
Tom, just emailed you back. Check the jumper mods out. Thats the source of your issues im sure of it
Re: steppers skipping by theselves?
Posted: Mon Sep 24, 2012 4:02 pm
by tom10122
I think I'm gonna redo the jumper mod and I'll get back to you
Re: steppers skipping by theselves?
Posted: Sun Sep 30, 2012 7:59 pm
by tom10122
worked for two prints now the problem came back, soldered the jumpers, thinking it was a bad connection but the still skip