Printed a robot.

[barry99705]

Toy anyway. Still screwing around. The head is pla, the body is abs. Head printed much better than the abs. Pretty slick model. The neck is captured inside the chest piece, has a joint on each end for the head and lower body. The fingers and feet have a captured hinge, and the wrist has a captured ball joint. It gets held together with small diameter elastic string. He's about a foot tall. Not too bad for the 4th and 5th prints.

[img]https://lh3.googleusercontent.com/-w67t ... 205704.jpg[/img]

[thedoble]

cool detail on the hands!

[Eaglezsoar]

Not bad at all for the 4th and 5th prints.
I can't even imagine what you will be printing in a couple of years!