Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Jan 10, 2016 2:35 am
Just designed the probe holder to be mounted on my new delta printer the OPTIMUS-4G
Can we see some pictures of the whole printer?
It looks neat!
Welcome to the SeeMeCNC Community
Have a look around and join today!
https://download.seemecnc.com/
Inductive Proximity Probe Holder M8- Limit Switches
Page 1 of 1
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Jan 10, 2016 5:22 am
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Thu Mar 03, 2016 6:12 pm
Can you share the config file for auto bed leveling procedure using Inductive probe ?
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Mar 06, 2016 9:14 am
Eaglezsoar... i shall share the video once uploaded.
[youtube]http://www.youtube.com/watch?v=0JmmbIUZOI4[/youtube]
waran14..i am using Marlin RC for autocalibration...
[youtube]http://www.youtube.com/watch?v=0JmmbIUZOI4[/youtube]
waran14..i am using Marlin RC for autocalibration...
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Mar 06, 2016 9:54 am
Another-one..
[youtube]http://www.youtube.com/watch?v=hzhip47a ... e=youtu.be[/youtube]
[youtube]http://www.youtube.com/watch?v=hzhip47a ... e=youtu.be[/youtube]
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Mar 06, 2016 10:28 am
Remove the s in https for youtube videos.Khalid Khattak wrote:Eaglezsoar... i shall share the video once uploaded.
[youtube]http://www.youtube.com/watch?v=0JmmbIUZOI4[/youtube]
waran14..i am using Marlin RC for autocalibration...
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Mar 13, 2016 11:14 am
Finally the 1st few prints on my home made 2nd delta printer OPTIMUS-4G. These are calibration prints.
[youtube]http://www.youtube.com/watch?feature=pl ... 4rHFN3G-4s[/youtube]
[youtube]http://www.youtube.com/watch?feature=pl ... 4rHFN3G-4s[/youtube]
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Sun Mar 13, 2016 4:10 pm
[youtube]http://www.youtube.com/watch?v=u4rHFN3G-4s[/youtube]Khalid Khattak wrote:Finally the 1st few prints on my home made 2nd delta printer OPTIMUS-4G. These are calibration prints.
[youtube]http://youtu.be/u4rHFN3G-4s[/youtube]
Also has to be the full link, not the shortened one. Don't know why, that's just how it is...
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Mon Mar 14, 2016 10:11 am
Barry Thanks for the guidance..
Re: Inductive Proximity Probe Holder M8- Limit Switches
Posted: Mon Mar 14, 2016 8:18 pm
No problem. I cussed at the screen for a while figuring things out, so I try to spread the word!Khalid Khattak wrote:Barry Thanks for the guidance..