Page 1 of 1
Some Noobs Need Help
Posted: Thu Mar 03, 2016 3:18 pm
by engineeringsquad
We're pretty far along with the building process, and we've noticed we have a couple of tiny fans. We've looked at multiple sets of instructions, and there's nothing about them in there. We are building a Rostock Max V2... Help?
Re: Some Noobs Need Help
Posted: Thu Mar 03, 2016 3:24 pm
by geneb
You'll get to the tiny fans in the User Guide.
g.
Re: Some Noobs Need Help
Posted: Thu Mar 03, 2016 3:42 pm
by engineeringsquad
geneb wrote:You'll get to the tiny fans in the User Guide.
g.
Thanks!
Re: Some Noobs Need Help
Posted: Thu Mar 03, 2016 5:27 pm
by Windshadow
put a dab of hot glue on the layer fan wires where they come out of the fan itself. mine fatigue broke right at that spot after about 35 hours of printing
Re: Some Noobs Need Help
Posted: Fri Mar 04, 2016 10:23 am
by Eaglezsoar
Windshadow wrote:put a dab of hot glue on the layer fan wires where they come out of the fan itself. mine fatigue broke right at that spot after about 35 hours of printing
Good Tip!