Extruder is not changing Z axis during print
Posted: Sun Feb 03, 2019 12:37 pm
Here's an odd one. I can use the HOME TOWERS command on the menu and the printer responds as expected with the towers finding home and double tapping the home switches.
When I go to print something the extruder finds the build plate just fine and begins printing. What's odd is that the Z axis never changes throughout the print. I allowed one print to go 15 or 20 minutes, thinking it might begin changing but it didn't and began digging trenches in the already laid filament.
Anyone else have that happen?
When I go to print something the extruder finds the build plate just fine and begins printing. What's odd is that the Z axis never changes throughout the print. I allowed one print to go 15 or 20 minutes, thinking it might begin changing but it didn't and began digging trenches in the already laid filament.
Anyone else have that happen?
