Welcome to the SeeMeCNC Community

Posted: **Fri May 23, 2014 11:04 pm**

Part printed for a client.

- orange ABS
- E3D V5 w/0.40mm nozzle
- 100 micron layers
- printed at 10mm/s
- printed at 260 Celsius to improve layer adhesion
- part fan at 50%
- supports carefully removed

[img]http://i.imgur.com/qih9CpW.jpg[/img]

Posted: **Fri May 23, 2014 11:49 pm**

Wow, that's excellent! .4mm nozzle?

Posted: **Fri May 23, 2014 11:51 pm**

Yep. a stock E3D V5 setup with the 0.40mm nozzle. updated first post.

Posted: **Sat May 24, 2014 12:53 am**

Brilliant! I'd never have even guessed you could make something so tiny and accurately with the stock .4mm even from the e3d. I've yet to really do much with my .25mm - if this is possible with .4mm now I'm excited!

Posted: **Sat May 24, 2014 2:21 am**

Cool cool cool!

That is very impressive. Good job!

Welcome to the SeeMeCNC Community

Tiny Tiny Tiny!

Tiny Tiny Tiny!

Re: Tiny Tiny Tiny!

Re: Tiny Tiny Tiny!

Re: Tiny Tiny Tiny!

Re: Tiny Tiny Tiny!