Welcome to the SeeMeCNC Community

I'll apologise in advance for just teasing this without proper details, but I was so happy to have it done (since it's the result of finally getting PLA to print nicely from my e3d V5) that I have to tell someone who will understand my pain

I need to finish the pieces and glue it all together but the print consists of:
• 8 parts, most of which took up the full build plate size
• print times ranged from 10 to 20 hours each
• 3 full rolls of black PLA even with huge cavities cut out of each to save filament
• print speeds ranging from 30 to 80mm/s.
• 0.6mm nozzle diameter
• over 100 hours of printing time

Don't worry I need to have this finished this week so I'll be showing pics soon

Again, sorry for the rotten tease.

*UPDATE*
Check out the final product!! On this post here:
http://forum.seemecnc.com/viewtopic.php?f=41&t=5650

But yet you do it anyways. And your avatar makes me think your not all that sorry! LOL

I just bought a Ferrari.

Ha ha... No I'm sorry somewhat and if I weren't so excited at printing PLA I wouldn't have done this

...or would I?

Well I just now tried to take a photo to show just a small segment, but there's really nothing I can photograph of it that wouldn't give the whole thing away :/ Man I should just be quiet, I feel I'm digging a hole here.

Cant wait to see .

[img]http://www.thesydneyshadowsclub.com.au/ ... shovel.jpg[/img] Is it Bill? Hurry up hurry up....lol

Hurry up with the pics Slappy! I want to see just how massive this is that it takes 3 rolls of filament!

Is that why I found a 3D scanner mounted above my toilet?!

I knew it! You are printing my arse! Wait, no, that would take WAY more than 3 rolls of PLA...

forrie wrote:[img]http://www.thesydneyshadowsclub.com.au/ ... shovel.jpg[/img] Is it Bill? Hurry up hurry up....lol

Oh man that brought back memories....

Ha ha, I'm getting closer It's 95% glued and I'll paint it tomorrow!

Hurry up miss Jane was blackboards line

Did the blackboard ever say "Miss Jane", though, or was that just Mr Squiggle?

lol, spot the aussie in this thread!

You know I don't recall.... I know blackboard was really impolite so I doubt he'd say 'miss jane'

I stand corrected lol Mr squiggle would do the "hurry up miss jane" trying to get his rocket door open.and black board was just "Hurry up"

"trying to get his rocket door open"... That show and Agro's Cartoon Connection... They weren't kids shows at all!

Agro was a durrrty, durrrty little bugger.

Anyway - where's some photos of this megamuffinmcprintypants?

Yeah man, he was completely kid-inappropriate!

Well it's now painted, I'm getting my sister to shoot some photos of it and I'll upload them in the morning

McSlappy needs to be McSlapped!

WHAT IS IT?! You are killing me with anticipation!

http://forum.seemecnc.com/viewtopic.php?f=41&t=5650

I've updated the first post with this too. Check it out!