Page 1 of 1
Help with prints
Posted: Fri Apr 10, 2015 12:22 am
by ericpudding
My Rostock Max has recently not be printing very well lately. The sides are not smooth and I dont know how to fix it. Here's a picture.
http://i.imgur.com/5HEItQ7.jpg I don't think this is due to belt tension because I recently tightened them. Any ideas? Thanks
Re: Help with prints
Posted: Fri Apr 10, 2015 12:41 am
by Sonrisa3D
Check Cheapskates - might have come loose
Re: Help with prints
Posted: Fri Apr 10, 2015 5:51 am
by teoman
Check your joints.
Re: Help with prints
Posted: Fri Apr 10, 2015 10:25 am
by bvandiepenbos
ezStruder could be slipping. Do you hear it clicking when printing?
Watch the filament as it feeds in, does it stop-start even when hobbed drive roller is moving? I put marks on filament with a sharpie so I can see movement easier.